For easier reading, turn your phone sideways or open full screen.
Download the presentation as PDF
About this presentation
MOBA based geometry and load moment control, retrofitted to existing fire-fighting aerial ladders.
System introduction
- Geometric limitation: Limitation based on the main boom length.
- Radius limit control: Connected to the articulated boom and the jib boom.
- Load moment control: Fits almost any elevated platform or ladder, as retrofit or OEM: 10 working tables, 4 (8) swing zones, 3 basket load limits and a 5-step outrigger spread.
- Three-part software: Chassis, tower and basket sections communicate with each other but work independently unless needed.
System components
Turret components: Wind sensor, CANCom intercom device, MOBA HMI with 7" display, MPC113 controller, MSC113 slave unit, Turret leveling angle sensors, X and Y axis, Pressure sensors, 4 pcs, 40 x 50 control box, A4U remote support unit, Ladder angle sensor, Ladder length sensor, Turret slewing encoder.
Cage components: CANCom intercom device, Cage joysticks, 2 pcs + 4.3" display, Cage level angle sensor, 25 x 35 control box, Ultrasonic sensors, 5 pcs, MPC113 controller.
Truck and cabin components: 7" truck displays, 2 pcs, CANbus joysticks, 2 pcs, MPC113 controller, 40 x 50 control box, Truck leveling angle sensor, MSC113 slave unit, 4.7 m length sensors, 4 pcs, 4.3" cabin display.
A4U remote support (optional)
GPRS and GPS based, two-way communication from the machine to the cloud. A4U and the myA4U platform form an end-to-end solution for mobile machinery manufacturers. Machine data is collected through IoT services and followed on myA4U. Service teams can follow their machines remotely and improve operating efficiency.
LMI logic
Working screen: boom length, radius, angle, cage load and outrigger status in one view.
Dynamic lateral tables follow cage load and outrigger position. Each of the 10 geometric tables has a second limit (cage radius limit).
- 4 swing zones: Four zones around the turret, defined relative to the cab front.
- Outrigger based: Zone borders follow the position of the four outriggers.
- 6 levels: Each zone border moves in 6 steps with the outrigger spread.
Example: 100 kg cage load, table numbers and radius limits for lateral, front and rear sectors. The same table combination is used for 300 kg and 500 kg cage loads.