Skip to content
MOBA · Displays and HMI’s

MOBA MVT-43-V 4.3″ Graphic Display with Camera Input

The MVT-43-V is a 4.3-inch, sunlight-readable graphic display for mobile machines. Eight keys, each with its own white LED backlight, sit on both sides of the screen; on the back there is an analog camera input, two CAN lines, USB, four inputs and four outputs. Graphics are built in TouchGFX Designer and the application logic in STM32CubeIDE. EHR Elektronik develops application software for this display; the screen in the picture is our application for aerial work platforms.

MOBA MVT-43-V 4.3-inch graphic display with 8 backlit keys, showing the EHR aerial work platform application

Highlights

  • 4.3″ IPS TFT, 480×272, 16.7M colours
  • 900 cd/m², sunlight readable
  • 8 keys, each with its own white LED backlight
  • 1× analog camera input (PAL)
  • 2× CAN-bus, ISO 11898-2
  • IP67, -30 °C … +75 °C

Programming and EHR support

  • Graphics: TouchGFX Designer, logic: STM32CubeIDE
  • ARM Cortex-M7, 480 MHz
  • 64 MB flash, 32 MB RAM
  • Software update via CAN-bus or USB
  • Battery-buffered real time clock
  • Application software by EHR Elektronik

Technical Specifications

Electrical and interfaces
Operating voltage 8 … 32V DC
Current consumption 100 … 500 mA at 12V (depending on brightness)
Inputs 4× digital high side / analog input (0-32V DC) + ignition input
Outputs 4× digital high side output (2A max.)
CAN 2× CAN-bus, ISO 11898-2 compliant
Video 1× analog video input (PAL)
USB 1× USB 2.0
Connector TE AMP 26-pin
Display and user interface
Display type IPS TFT-LCD with LED backlight
Resolution 480 × 272 pixels
Brightness 900 cd/m²
Contrast ratio 800:1
Colours 16.7M
Keypad 8 keys, each with independent white LED backlight
Buzzer 50 dB
Electronics
CPU ARM Cortex-M7, 32-bit
Clock rate 480 MHz
Flash 64 MB
RAM 32 MB
Real time clock Battery buffered
Programming Graphics in TouchGFX Designer, logic in STM32CubeIDE
Mechanical and ambient
Weight 0.2 kg
Ingress protection IP67
Material Plastic with silicone coating
Mounting In-dash or out-dash with RAM-MOUNT type A
Dimensions (W × H × D) 163 × 99.5 × 38.3 mm
Operating temperature -30 … +75 °C
Storage temperature -30 … +80 °C
Standards EN 61000-6-2:2005, EN 61000-6-4:2007 + A1:2011

Connector pinout (TE AMP 26-pin)

Pin 1 + Operating voltage
Pin 2 – Operating voltage
Pin 3 DI_0: digital high side ignition input
Pin 4 USB VCC (USB host)
Pin 5 USB D+
Pin 6 USB D-
Pin 7 USB GND
Pin 8 USB shield
Pin 9 CAN-L 1
Pin 10 CAN-H 1
Pin 11 CAN GND
Pin 12 CAN-L 2
Pin 13 CAN-H 2
Pin 14 CAN GND
Pin 15 DI_1: digital/analog high side input 0-32V DC
Pin 16 DI_2: digital/analog high side input 0-32V DC
Pin 17 DI_3: digital/analog high side input 0-32V DC
Pin 18 DI_4: digital/analog high side input 0-32V DC
Pin 19 OUT_0: digital high side output 2A
Pin 20 OUT_1: digital high side output 2A
Pin 21 OUT_2: digital high side output 2A
Pin 22 OUT_3: digital high side output 2A + camera supply
Pin 23 +VP: power supply for outputs
Pin 24 GND for camera supply
Pin 25 Camera-: video input signal –
Pin 26 Camera+: video input signal +

DOWNLOADS

Request a quotation or technical information for this product — Contact us →

Get the most out of your machines

Do you have a project or a question? Our engineers are ready to help.